EN Series

EN Series Alloy Steel

 

We are offering a wide range of EN19 Alloy Steel. It is a high quality, high tensile alloy steel usually supplied readily machinable in ‘T’ condition, giving good ductility and shock resisting properties combined with resistance to wear. It is suitable for highly stressed applications where greater strength is required. This range of products are sourced from reliable and trusted vendors of the market, who manufacture the range according to the set industry standards.

 

GRADE AISI C Si Mn Cr Co Mo Ni
EN-8 1040 0.35-0.45 0.10-0.35 0.60-0.90 0.06
Generally used for moderately stressed parts of motor vehicle and general engineering works
 

APPLICATION- CRANK SHAFTS, AUTOMOBILE AXLE BEEMS, CONNECTING RODS, LIGHTLY STRESSED GEARS

GRADE AISI C Si Mn Cr Co Mo Ni
EN-9 1055 0.45-0.60 0.10-0.35 0.50-0.80 0.06
Mainly used in machine parts which require moderate wear resistance
 

APPLICATION- CRANK SHAFTS, CYLINDERS, GEARS, SPROCKETS

GRADE AISI C Si Mn Cr Co Mo Ni
EN-19 4140 0.35-0.45 0.10-0.35 0.50-0.80 0.90-1.50 0.05 0.20-0.40
Suitable for heat treated parts where high tensile and impact are required along with high endurance bending strength.
 

APPLICATION- AXLE SHAFTS, CRANK SHAFTS, GEARS, CONNECTING RODS, STUDS, BOLTS, PROPELLOR SHAFT JOINTS

GRADE AISI C Si Mn Cr Co Mo Ni
EN-24 4340 0.35-0.45 0.10-0.35 0.45-0.70 0.80-1.40 0.05 0.20-0.35 1.30-1.80
Preffered to be applied for heat treated components having large sections and subject to exacting requirements.
 

APPLICATION- STUDS, PINIONS,TAPPETS,BORING BARS,CLUTCHES,CHAIN PARTS,CAM SHAFTS,SPIN DIES SCREWS,GEAR SHAFTS

GRADE AISI C Si Mn Cr Co Mo Ni
EN-31 52100 0.95-1.20 0.10-0.35 0.30-0.75 1.00-1.60 0.025
This steel has high resisting nature against wear and tear , can be used for components which are subject to severe abrasion, wear or high surface loading
 

APPLICATION- BALLS AND ROLLER BEARINGS,SPINNING TOOLS,BEADING ROLL PUNCHING AND DIES

GRADE AISI C Si Mn Cr Co Mo Ni
EN-36 3310 0.15 0.10-0.35 0.30-0.60 0.60-1.10 0.05 3.00-3.75
Mainly used for highlt stressed machine parts which are intended for cementation with high strength and core roughness
 

APPLICATION- DISC WHEELS,GROOVED SHAFTS,CAMS,GEARS,HEAVY VEHICLE AND AUTOMOBILE TRANSMISSION PARTS UNIVERSAL JOINTS

GRADE AISI C Si Mn Cr Co Mo Ni
EN-47 6150 0.45-0.55 0.5 0.50-0.80 0.80-1.20 0.05
It has a high raio of yeild point to tensile strength and high torsional fatigue strength
 

APPLICATION- HIGH DUTY VOLUTE AND LEAF SPRINGS,HEAVY ENGINE VALVE SPRINGS,HELICAL AND TOROSIONAL BAR SPRINGS

GRADE AISI C Si Mn Cr Co Mo Ni
SAE 8620 0.18-.23 0.20-0.35 0.70-0.90 0.40-0.60 0.04 0.15-0.25 0.40-0.70
Generally used for parts where direct hardening is preffered.
 

APPLICATION- GEARS,PINIONS,LAY SHAFTS,CAMSHAFT,MINING HAULAGE,CAGE SUSPENSION,LIFTING GEARS

GRADE AISI C Si Mn Cr Co Mo Ni
EN353 0.10-0.20 0.20-0.35 0.50-1.00 0.75-1.25 0.08-0.15 1.00-1.50
Generally used for parts where direct hardening is preffered.
 

APPLICATION- GEARS,PINIONS,LAY SHAFTS,CAMSHAFT,MINING HAULAGE,CAGE SUSPENSION,LIFTING GEARS

 

If You Need Steel Related Information ... We Are Available For You

Contact Us

Copyright © Radhika Alloys 2020. All rights reserved.